The Time Machine Secure Order Form

Fill out the following form and submit it (the SUBMIT button is at the bottom).
We will reply with an email to confirm that your order has been received.

You should hear from us within 24 hours (we may not respond on week-ends and holidays). If you don't get a reply, we may not have gotten your order!

Every Time Machine is built to order. It is not uncommon for there to be a lead time of one to three weeks to fill a new order.

Click in a box to order that item.
Click on the item name to see a picture of that item.

    The Time Machine, $325
    Moco Time Machine for motion control, $395

    Electroluminescent backlight on the LCD screen
        (so you can see it in a dark studio), $95
    Optional "shutter jack" with optical interrupter sensor, $65
         (Usually you will also need to order a second optical interrupter
         to trigger the flash.)

Foreign orders: We can supply a "universal" AC adaptor that works on 100 to 240 volts, 50 or 60 cycles. It comes with four different plug types (click here to see). The universal AC adaptor is $10.
    Universal AC adpator, $10

Input sensors
    Microphone sensor, $35
    Clip-on acoustic/vibration sensor, $35
    Flat disk acoustic/vibration sensor, $40
    Optical interrupter, $35
    Reflective optical sensor, $35
    Fast photo diode detector, $35
    Time lapse light sensor, $35
    Magnetic sensor, $35
    24 hour time lapse timer, $65
    Laser sensor, $150
    Laser sensor for crossed beam use, $175
         (This sensor is used as half of a pair and requires a regular laser sensor too.)
    IR beam sensor, $135
    IR beam sensor for crossed beam use, $160
         (This sensor is used as half of a pair, and requires a regular IR beam sensor too.)
    Long Range IR beam sensor, $150
         (Has a toggle switch to select low power (~15 feet) or high power (>50 feet) range with reflector.)
    Motion detector (Passive IR), $75
    Ballistic sensor, $150
    20 foot extension cord for optical sensors, $20
 
Output cables

   Shutter cables - these cables plug into the Time Machine at one end and into your camera at the other.

    Shutter release cables for Nikon D1, D2, D3, D200, D300, D700 etc. (Nikon 10-pin connector)
        Imported cable, $45
        Made from Nikon MC-30, $85
   Shutter release cable for Nikon D80 and D70s (made from Nikon cable MC-DC1), $45
   Shutter release cable for Nikon D90, D5000, D7000, D3100 etc. (made from Nikon cable MC-DC2), $45

    Shutter release cables for Canon EOS 5D, 7D, 40D, 50D, etc. (Canon 3-pin EOS connector)
       Imported cable, $45
       Made from Canon RS80-N3, $85
   Shutter release cable for Canon 60D, Digital Rebel 300D, 350D, 400D, 450D, 500D, 550D, 1000D, etc.
        (Canon cable RS-60E3), $25
   Shutter release cable for Canon G10, G11 (Canon cable RS-60E3), $25

   Shutter release cable for Olympus E3, E1, E-10/E20 etc (Olympus cable RM-CB1), $85
   Shutter release cable for Olympus Evolt E-410, E-510 (Olympus cable RM-UC1), $85
   Shutter release cable for Contax 645, $65
   Shutter release cable for Sony DSC-F707 digital camera, $65
   Shutter release cable for Sony DSC-F828, V3, R1, etc. digital cameras, $65
   Shutter release cable for Sony Alpha series (Sony cable RM-S1AM), $45
   Shutter release cable for Panasonic G10 etc. (DMW-RSL1), $55
   Shutter release cable for Pentax K100D etc., $25
   Shutter jack cable for Pocket Wizard, $20

    Twenty foot extension cord for shutter cables, $20
    Relay box for two simultaneous shutter cables, $65

   IR remote emulators

   IR remote emulator for Nikon D40, D50, D60, D70, D80, D3000, etc. (Nikon remote ML-L3), $35
   IR remote emulator for Canon G6, S60, etc. (Canon remote WL-DC100), $35
   IR remote emulator to trigger movie mode on Canon 7D, $35
   IR remote emulator for Olympus (Olympus remote RM-1/RM-2), $35
   IR remote emulator for Sony (Sony remote RMT-814 photo button), $35
   IR remote emulator for Sony (Sony remote RMT-DSC1 shutter button), $35
   IR remote emulator for Pentax Optio and K10D, K100D, etc. (Remote type "F"), $35
   IR remote emulator for JVC still images (RM-V750U), $35
   IR remote emulator for JVC movies (RM-V750U), $35

   LANC
   Lanc interface cable for video cameras, $65
   

Accessories
     Drip Kit for water drop photography: $150
    Update firmware chip in Time Machine: $15
          Note: This is needed ONLY if you have an older Time Machine and want to add the Drip Kit.
          The chip is in a socket and easy to replace.

    Fabric carry bag for Time Machine, $12
    Small table-top tripod for laser sensor, IR beam sensor, or external flash, $13

   Flash cables
     Flash extension cord, PC male to PC female, $15
    Flash extension cord, PC male to PC male, $15
    Pocket Wizard cable for Time Machine flash jack, $20
    Sync jack splitter to run up to three flashes in parallel (PC male to three PC female), $20
    Hot shoe adaptor to add a PC female jack to a flash, $17
  

"Mumford Moco" motion control equipment
The Time Machine must be ordered separately.
    Standard rotary table 4" diameter for time lapse panning or programmed rotation, $795
        Includes a Sherline or Mumford motor driver
        Mounting plate drilled for 3/8-16 tripod
        Drill mounting plate for 1/4-20 tripod instead

    Enhanced rotary table 4" diameter for ramped time lapse panning, $1050
        Includes a Sherline motor driver
        Mounting plate drilled for 3/8-16 tripod
        Drill mounting plate for 1/4-20 tripod instead

    Miniature rotary table 2-1/2" pan head for time lapse panning, $750
        Will do ramped panning
        Requires the Mumford Motor Driver below and a Moco Time Machine.

    Manfrotto 3025 camera head with spacer block and mounting rod for the top of a 4" rotary table, $75
    4 inch drive pulley for using a 4" rotary table with track and dolly, $20

    Four foot monorail for linear time lapse panning, $750
    Six foot monorail for linear time lapse panning, $750
         Monorails require a Time Machine and Motor Driver for operation.

    Mumford Motor Driver for use with the Moco Time Machine, monorail, and rotary tables, $295

Personal Information
First and last name:
      You must enter your name

Business or shop name:
     

Street address:
     

City, State, and Zip code:
     

Country (if outside the USA):
     

Phone number with area code:
     

Email address:
      You must enter an email address

Be absolutely sure that your email address is correct. We'll need it to reply!

Method of payment
You may pay with a Visa, MasterCard, American Express, send a check, or we can ship COD.

This page is a "Secure Server". You may safely enter your Visa or MasterCard number. When we receive your order, we'll email you back with an acknowledgement of your order, the total charges, and the expected shipping date.

You can also call us at (805) 687-5116.
   Visa
   MasterCard
   American Express
Your card number:
Expiration date:
3-digit security code:
Name as it appears on the card:

Postage for a Time Machine via UPS ground in the U.S. is about $15, depending on what you order and where you are. Overseas shipments commonly cost about $50. We don't know the exact charges until the order is ready and weighed. Insurance value is limited to some countries, and some may charge a duty or VAT on delivery.

Comments? Special instructions?

Security check
We now find it necessary to confirm that orders are placed by real people and not automated programs.
In the line of text below, one word is in BOLD type. Please enter that word in the space below.
Then click on the SUBMIT button.

"Science and technology"

Enter the bold word:

 

Click the SUBMIT button below to send us your order
This will email your order to us. Remember, we will reply within 24 hours (we may not respond on week-ends or holidays). If you don't hear from us, we didn't get your order! To cancel your order and remove all entries, click on the RESET button.

 

           

Thanks for your order!